Description
CAN bus Ballast is designed to solve problems such as flickering/Dash Error Messages on MOST vehicles*
High-Performance Design with Advanced Circuitry!
- 35 Watt/55 Watt Operation. Compatible with both types of bulbs 35W and 55W.
- 3500 Hours Operation
- 9V-16V Input Voltage
- Compact and reliable
- Designed for any aftermarket HID kit on the market (NOT AN OEM BALLAST)
- 3 Year Warranty
Can Bus Ballast gets rid of the flickering issues or headlamp error light issue. This issue is known on most European cars (BMW/BENZ/AUDI/VW) and now it occurs on some American cars (CHRYSLER/DODGE/JEEP). The reason behind this is due to halogen bulb being 55 W and HID being 35 W. Therefore when an HID kit is installed into the vehicle, the car ECU detects the lights are running at 35W instead of the normal 55 W. Two things will happen when it detects this. 1. When running at 35W, the ECU thinks the light bulb on one side is broken and cut down on the power it sends to the headlight, causing the HID to flicker because there is not enough power. 2. It will cause a headlight error light on the dash because it thinks 1 side of the headlight is broken. One or both of these issues will occur.
This Can Bus will trick the ECU into thinking the HID is running at 55W, when it is really running at 35 W. This will trick the ECU into thinking that both sides of the headlights are working fine and will allow the ECU to give the headlights full power to run properly, which will get rid of the flickering issue and error light issue. This Ballast is safe and will not damage any ECU or electrical wiring.
